What is AZ-700 — Designing and Implementing Microsoft Azure Networking Solutions?
The AZ-700 exam is a Microsoft certification that validates your skills and knowledge as a Designing and Implementing Microsoft Azure Networking Solutions professional. Whether you're looking to advance your career, get a pay raise, or simply prove your Azure expertise — this certification is your next big step.
Passing AZ-700 tells employers one thing — you know your stuff. And with the cloud industry growing faster than ever in 2026, Azure certified professionals are in higher demand than ever before.
Everything You Need to Pass AZ-700 — In One Place
Exam-Accurate Practice Questions
Every question in our AZ-700 practice test is based on the latest 2026 Microsoft exam objectives. No outdated content. No irrelevant questions. Just the real stuff that actually shows up on your exam.
Detailed Explanations For Every Answer
Getting the right answer isn't enough — you need to understand why it's right. Every single question comes with a detailed explanation so you actually learn the concept, not just memorize the answer.
Study In Any Format
PDF for studying on any device. Desktop software for offline practice. Web-based test engine for practicing on your phone. However you like to study — we've got you covered.
Always Updated
Microsoft updates AZ-700 regularly — and so do we. Our team tracks every single change and updates our material within days. You'll never walk into your exam with outdated preparation.
Why Thousands of Professionals Choose Dumps4Azure for AZ-700?
There are hundreds of exam prep sites out there. So why do thousands of professionals keep coming back to Dumps4Azure? Because we don't just throw questions at you and hope for the best. We give you the complete picture — updated material, real explanations, multiple study formats, and a money-back guarantee that proves we actually believe in what we're selling. When you study with Dumps4Azure, you're not just preparing for AZ-700 — you're preparing to pass it.
AZ-700 is a challenging exam — but with the right preparation it's absolutely passable on your first attempt. Our practice tests are designed to match the exact difficulty level of the real exam so there are no surprises on exam day.
The AZ-700 exam typically contains between 40 to 60 questions. Our practice tests cover all question types including multiple choice, drag and drop, and case studies.
Most professionals pass AZ-700 after 2 to 4 weeks of focused preparation using our practice tests. The more consistently you practice, the faster you'll be ready.
Absolutely! You can try our free AZ-700 sample questions before purchasing. We want you to see the quality of our material before spending a single penny.
A: We offer a full money-back guarantee. If you study with our AZ-700 practice tests and still don't pass, contact us and we'll refund every penny. Zero risk. All reward.
Dump4Azure Exam Package – PDF vs Testing Engine
Compare features of PDF and Testing Engine and choose the best option for your exam preparation.
Features
PDF
Testing Engine
Latest & Real Exam Questions
✓
✓
Covers MCQs, Drag & Drop & Case Studies
✓
✓
Free 3 Months Updates
✓
✓
100% Money-Back Guarantee
✓
✓
Secure Checkout (SSL Protected)
✓
✓
Full Privacy Protection
✓
✓
Real Exam Simulation
✓
Practice Mode + Exam Mode
✓
Instant Result & Score Tracking
✓
Smart Question Selection (Custom/Random)
✓
Save Notes & Mark Important Questions
✓
Microsoft AZ-700 Sample Questions
Question 1
Task 4 You need to ensure that connections to the storage34280945 storage account can be made by using an IP address in the 10.1.1.0/24 range and the name storage34280945.pnvatelinlcblob.core.windows.net.
Answer: See the Explanation below for step by step instructions.
Explanation:
Here are the steps and explanations for ensuring that connections to the storage34280945
storage account can be made by using an IP address in the 10.1.1.0/24 range and the
name stor-age34280945.pnvatelinlcblob.core.windows.net:
To allow access from a specific IP address range, you need to configure the Azure
Storage firewall and virtual network settings for your storage account. You can do
this in the Azure portal by selecting your storage account and then selecting
Networking under Settings1.
On the Networking page, select Firewalls and virtual networks, and then select
Selected networks under Allow access from1. This will block all access to your
storage account except from the networks or resources that you specify.
Under Firewall, select Add rule, and then enter 10.1.1.0/24 as the IP address or
range. You can also enter an optional rule name and description1. This will allow
access from any IP address in the 10.1.1.0/24 range.
Select Save to apply your changes1.
To map a custom domain name to your storage account, you need to create a
CNAME record with your domain provider that points to your storage account
endpoint2. A CNAME record is a type of DNS record that maps a source domain
name to a destination domain name.
Sign in to your domain registrar’s website, and then go to the page for managing
DNS settings2.
Create a CNAME record with the following information2:
Save your changes and wait for the DNS propagation to take effect2.
To register the custom domain name with Azure, you need to go back to the Azure
portal and select your storage account. Then select Custom domain under Blob
service2.
On the Custom domain page, enter stor
age34280945.pnvatelinlcblob.core.windows.net as the custom domain name and
select Save2.
Question 2
Task 6 You need to ensure that all hosts deployed to subnet3-2 connect to the internet by using the same static public IP address. The solution must minimize administrative effort when adding hosts to the subnet.
Answer: See the Explanation below for step by step instructions.
Explanation:
Here are the steps and explanations for ensuring that all hosts deployed to subnet3-2
connect to the internet by using the same static public IP address:
To use the same static public IP address for multiple hosts, you need to create a
NAT gateway and associate it with subnet3-2. A NAT gateway is a resource that
performs network address translation (NAT) for outbound traffic from a subnet1. It
allows you to use a single public IP address for multiple private IP addresses2.
To create a NAT gateway, you need to go to the Azure portal and select Create a
resource. Search for NAT gateway, select NAT gateway, then select Create3.
On the Create a NAT gateway page, enter or select the following information and
accept the defaults for the remaining settings:
Select Review + create and then select Create to create your NAT gateway3.
To associate the NAT gateway with subnet3-2, you need to go to the Virtual
networks service in the Azure portal and select your virtual network.
On the Virtual network page, select Subnets under Settings, and then select
subnet3-2 from the list.
On the Edit subnet page, under NAT gateway, select your NAT gateway from the
drop-down list. Then select Save.
Question 3
Task 2 You need to ensure that you can deploy Azure virtual machines to the France Central Azure region. The solution must ensure that virtual machines in the France Central region are in a network segment that has an IP address range of 10.5.1.0/24.
Answer: See the Explanation below for step by step instructions.
Explanation:
To deploy Azure virtual machines to the France Central region and ensure they are in a
network segment with an IP address range of 10.5.1.0/24, follow these steps:
Step-by-Step Solution
Step 1: Create a Virtual Network in France Central
Navigate to the Azure Portal.
Search for “Virtual networks” in the search bar and select it.
Click on “Create”.
Enter the following details:
Click on “Next: IP Addresses”.
Step 2: Configure the Address Space and Subnet
In the IP Addresses tab, enter the address space as 10.5.1.0/24.
Click on “Add subnet”.
Enter the following details:
Click on “Add”.
Click on “Review + create” and then “Create”.
Step 3: Deploy Virtual Machines to the Virtual Network
Navigate to the Azure Portal.
Search for “Virtual machines” in the search bar and select it.
Click on “Create” and then “Azure virtual machine”.
Enter the following details:
Click on “Next: Disks”, configure the disks as needed, and then click on “Next:
Networking”.
In the Networking tab, select the virtual network (VNet-FranceCentral) and subnet
(Subnet-1) created earlier.
Complete the remaining configuration steps and click on “Review + create” and
then “Create”.
Explanation
Virtual Network: A virtual network in Azure allows you to create a logically isolated
network that can host your Azure resources.
Address Space: The address space 10.5.1.0/24 ensures that the VMs are in a
specific network segment.
Subnet: Subnets allow you to segment the virtual network into smaller,
manageable sections.
Region: Deploying the virtual network and VMs in the France Central region
ensures that the resources are physically located in that region By following these steps, you can ensure that your Azure virtual machines in the France
Central region are deployed within the specified IP address range of 10.5.1.0/24.
Question 4
Task 11 You are preparing to connect your on-premises network to VNET4 by using a Site-to-Site VPN. The on-premises endpoint of the VPN will be created on a firewall named Firewall 1. The on-premises network has the following configurations: • Internal address range: 10.10.0.0/16. • Firewall 1 internal IP address: 10.10.1.1. • Firewall1 public IP address: 131.107.50.60. BGP is NOT used. You need to create the object that will provide the IP addressing configuration of the onpremises network to the Site-to-Site VPN. You do NOT need to create a virtual network gateway to complete this task.
Answer: See the Explanation below for step by step instructions.
Explanation:
Here are the steps and explanations for creating the object that will provide the IP
addressing configuration of the on-premises network to the Site-to-Site VPN:
The object that you need to create is called a local network gateway. A local
network gateway represents your on-premises network and VPN device in
Azure. It contains the public IP address of your VPN device and the address
prefixes of your on-premises network that you want to connect to the Azure virtual
network1.
To create a local network gateway, you need to go to the Azure portal and
select Create a resource. Search for local network gateway, select Local network
gateway, then select Create2.
On the Create local network gateway page, enter or select the following
information and accept the defaults for the remaining settings:
Select Review + create and then select Create to create your local network
gateway2.
Question 5
Task 3 You plan to implement an Azure application gateway in the East US Azure region. The application gateway will have Web Application Firewall (WAF) enabled. You need to create a policy that can be linked to the planned application gateway. The policy must block connections from IP addresses in the 131.107.150.0/24 range. You do NOT need to provision the application gateway to complete this task.
Answer: See the Explanation below for step by step instructions.
Explanation:
Here are the steps and explanations for creating a policy that can be linked to the planned
application gateway and block connections from IP addresses in the 131.107.150.0/24
range:
To create a policy, you need to go to the Azure portal and select Create a
resource. Search for WAF, select Web Application Firewall, then select Create1.
On the Create a WAF policy page, Basics tab, enter or select the following
information and accept the defaults for the remaining settings:
On the Custom rules tab, select Add a rule to create a custom rule that blocks
connections from IP addresses in the 131.107.150.0/24 range2. Enter or select the
following information for the custom rule:
On the Review + create tab, review your settings and select Create to create your
WAF policy1.
To link your policy to the planned application gateway, you need to go to
the Application Gateway service in the Azure portal and select your application
gateway3.
On the Web application firewall tab, select your WAF policy from the drop-down list
and select Save
Question 6
Task 7 You need to ensure that hosts on VNET2 can access hosts on both VNET1 and VNET3. The solution must prevent hosts on VNET1 and VNET3 from communicating through VNET2.
Answer: See the Explanation below for step by step instructions.
Explanation:
Here are the steps and explanations for ensuring that hosts on VNET2 can access hosts
on both VNET1 and VNET3, but hosts on VNET1 and VNET3 cannot communicate through
VNET2:
To connect different virtual networks in Azure, you need to use virtual network
peering. Virtual network peering allows you to create low-latency, high-bandwidth
connections between virtual networks without using gateways or the internet1.
To create a virtual network peering, you need to go to the Azure portal and select
your virtual network. Then select Peerings under Settings and select + Add2.
On the Add peering page, enter or select the following information:
Select Add to create the peering2.
Repeat the previous steps to create peerings between VNET2 and VNET1, and
between VNET2 and VNET3. This will allow hosts on VNET2 to access hosts on
both VNET1 and VNET3.
To prevent hosts on VNET1 and VNET3 from communicating through VNET2, you
need to use network security groups (NSGs) to filter traffic between
subnets. NSGs are rules that allow or deny inbound or outbound traffic based on
source or destination IP address, port, or protocol3.
To create an NSG, you need to go to the Azure portal and select Create a
resource. Search for network security group and select Network security
group. Then select Create4.
On the Create a network security group page, enter or select the following
information:
Select Review + create and then select Create to create your NSG4.
To add rules to your NSG, you need to go to the Network security groups service
in the Azure portal and select your NSG. Then select Inbound security rules or
Outbound security rules under Settings and select + Add4.
On the Add inbound security rule page or Add outbound security rule page, enter
or select the following information:
Select Add to create your rule4.
Repeat the previous steps to create inbound and outbound rules for your NSG that
deny traffic between VNET1 and VNET3 subnets. For example, you can create an
inbound rule that denies traffic from 10.0.1.0/24 (VNET1 subnet 1) to 10.0.3.0/24
(VNET3 subnet 1), and an outbound rule that denies traffic from 10.0.3.0/24
(VNET3 subnet 1) to 10.0.1.0/24 (VNET1 subnet 1).
To associate your NSG with a subnet, you need to go to the Virtual networks service in the Azure portal and select your virtual network. Then select Subnets
under Settings and select the subnet that you want to associate with your NSG5.
On the Edit subnet page, under Network security group, select your NSG from the
drop-down list. Then select Save5.
Repeat the previous steps to associate your NSG with the subnets in VNET1 and
VNET3 that you want to isolate from each other.
Question 7
Task 3 You need to ensure that hosts on VNET1 and VNET2 can communicate. The solution must minimize latency between the virtual networks.
Answer: See the Explanation below for step by step instructions.
Explanation:
To ensure that hosts on VNET1 and VNET2 can communicate with minimal latency, you
can use Virtual Network Peering. This method connects the two virtual networks directly
through the Microsoft backbone network, ensuring low-latency and high-bandwidth
communication.
Step-by-Step Solution
Step 1: Set Up Virtual Network Peering
Navigate to the Azure Portal.
Search for “Virtual networks” and select VNET1.
In the left-hand menu, select “Peerings” under the “Settings” section.
Click on “Add” to create a new peering.
Enter the following details:
Click on “Add”.
Step 2: Configure Peering on VNET2
Navigate to VNET2 in the Azure Portal.
In the left-hand menu, select “Peerings” under the “Settings” section.
Click on “Add” to create a new peering.
Enter the following details:
Click on “Add”.
Explanation
Virtual Network Peering: This feature connects two virtual networks in the same or
different regions, allowing resources in both networks to communicate with each
other as if they were part of the same network. The traffic between peered virtual
networks uses the Microsoft backbone infrastructure, ensuring low latency and
high bandwidth12.
Allow Virtual Network Access: This setting ensures that the virtual networks can
communicate with each other.
Allow Forwarded Traffic: This setting allows traffic forwarded from a network
security appliance in the peered virtual network.
Allow Gateway Transit: This setting allows the peered virtual network to use the
gateway in the local virtual network.
By following these steps, you can ensure that hosts on VNET1 and VNET2 can
communicate with minimal latency, leveraging the high-speed Microsoft backbone network.
Question 8
Task 10 You plan to deploy several virtual machines to subnet1-2. You need to prevent all Azure hosts outside of subnetl-2 from connecting to TCP port 5585 on hosts on subnet1-2. The solution must minimize administrative effort.
Answer: See the Explanation below for step by step instructions.
Explanation:
To prevent all Azure hosts outside of subnet1-2 from connecting to TCP port 5585 on hosts
within subnet1-2, you can use a Network Security Group (NSG). This solution is
straightforward and minimizes administrative effort.
Step-by-Step Solution
Step 1: Create a Network Security Group (NSG)
Navigate to the Azure Portal.
Search for “Network security groups” and select it.
Click on “Create”.
Enter the following details:
Click on “Review + create” and then “Create”.
Step 2: Create an Inbound Security Rule
Navigate to the newly created NSG.
Select “Inbound security rules” from the left-hand menu.
Click on “Add” to create a new rule.
Enter the following details:
Click on “Add” to create the rule.
Step 3: Associate the NSG with Subnet1-2
Navigate to the virtual network that contains subnet1-2.
Select “Subnets” from the left-hand menu.
Select subnet1-2 from the list of subnets.
Click on “Network security group”.
Select the NSG you created (NSG-Subnet1-2).
Click on “Save”.
Explanation
Network Security Group (NSG): NSGs are used to filter network traffic to and from
Azure resources in an Azure virtual network. They contain security rules that allow
or deny inbound and outbound traffic based on source and destination IP
addresses, port, and protocol1.
Inbound Security Rule: By creating a rule that denies traffic on TCP port 5585 from
any source outside of subnet1-2, you ensure that only hosts within subnet1-2 can
connect to this port.
Association with Subnet: Associating the NSG with subnet1-2 ensures that the
security rules are applied to all resources within this subnet.
By following these steps, you can effectively prevent all Azure hosts outside of subnet1-2
from connecting to TCP port 5585 on hosts within subnet1-2, while minimizing
administrative effort.
Question 9
Task 2 You need to create an Azure Firewall instance named FW1 that meets the following requirements: • Has an IP address from the address range of 10.1.255.0/24 • Uses a new Premium firewall policy named FW-pohcy1 • Routes traffic directly to the internet
Answer: See the Explanation below for step by step instructions.
Explanation:
To create an Azure Firewall instance, you need to go to the Azure portal and
select Create a resource. Type firewall in the search box and press Enter. Select
Firewall and then select Create1.
To assign an IP address from the address range of 10.1.255.0/24 to the firewall,
you need to select a public IP address that belongs to that range. You can either
create a new public IP address or use an existing one1.
To use a new Premium firewall policy named FW-policy1, you need to select
Premium as the Firewall tier and create a new policy with the name FW
policy12. A Premium firewall policy allows you to configure advanced features
such as TLS Inspection, IDPS, URL Filtering, and Web Categories3.
To route traffic directly to the internet, you need to enable SNAT (Source Network
Address Translation) for the firewall. SNAT allows the firewall to use its public IP
address as the source address for outbound traffic4.
Question 10
Task 5You need to archive all the metrics of VNET1 to an existing storage account.
Answer: See the Explanation below for step by step instructions.
Explanation:
To archive all the metrics of VNET1 to an existing storage account, you can use Azure
Monitor’s diagnostic settings. Here’s how you can do it:
Step-by-Step Solution
Step 1: Navigate to VNET1 in the Azure Portal
Open the Azure Portal.
Search for “Virtual networks” and select VNET1 from the list.
Step 2: Configure Diagnostic Settings
In the VNET1 blade, select “Diagnostic settings” under the “Monitoring” section.
Click on “Add diagnostic setting”.
Step 3: Set Up the Diagnostic Setting
Enter a name for the diagnostic setting (e.g., VNET1-Metrics-Archive).
Select the metrics you want to archive. You can choose from various metrics
like TotalBytesReceived, TotalBytesSent, etc.
Under “Destination details”, select “Archive to a storage account”.
Choose the existing storage account where you want to archive the metrics.
Configure the retention period if needed.
Step 4: Save the Configuration
Review your settings to ensure everything is correct.
Click on “Save” to apply the diagnostic setting.
Explanation
Diagnostic Settings: These allow you to collect and route metrics and logs from
your Azure resources to various destinations, including storage accounts, Log
Analytics workspaces, and Event Hubs.
Metrics: Metrics provide numerical data about the performance and health of your
resources. Archiving these metrics helps in long-term analysis and compliance.
Storage Account: Using an existing storage account ensures that the metrics are
stored securely and can be accessed for future analysis.
By following these steps, you can ensure that all the metrics of VNET1 are archived to your
existing storage account, enabling you to monitor and analyze the performance and health of your virtual network over time.
Microsoft AZ-700 Exam Reviews
Lucas JamesJun 13, 2026
Dumps4Azure made my AZ-700 exam preparation very smooth. The practice questions were clear and focused on real Azure networking scenarios.
EricaJun 12, 2026
I passed the AZ-700 exam on my first attempt thanks to Dumps4Azure. The study material was well-structured and easy to follow.
RubyJun 12, 2026
Great experience using Dumps4Azure for the AZ-700 exam. The questions helped me understand complex networking concepts better.
AdityaJun 11, 2026
The AZ-700 practice tests from Dumps4Azure helped me identify weak areas and improve my confidence before the exam.
RohanJun 11, 2026
I really liked the quality of Dumps4Azure content. The AZ-700 material was accurate, updated, and perfect for revision.
Joe WarrenJun 10, 2026
Dumps4Azure is a reliable platform for networking exam prep. The AZ-700 questions felt very close to the real exam format.
Zoe CamronJun 10, 2026
Thanks to Dumps4Azure, my AZ-700 exam preparation was organized and stress-free. The explanations were clear and helpful.
Sophia JamesJun 09, 2026
Excellent value for money. Dumps4Azure provided relevant and up-to-date questions for the AZ-700 exam.
Olivia JamesJun 09, 2026
I highly recommend Dumps4Azure for the AZ-700 exam. The practice tests saved me time and boosted my confidence.
Calvin ArthurJun 08, 2026
Dumps4Azure delivered exactly what I needed for the AZ-700 exam. Solid practice questions and great preparation support.
Lucas James
Jun 13, 2026
Erica
Jun 12, 2026
Ruby
Jun 12, 2026
Aditya
Jun 11, 2026
Rohan
Jun 11, 2026
Joe Warren
Jun 10, 2026
Zoe Camron
Jun 10, 2026
Sophia James
Jun 09, 2026
Olivia James
Jun 09, 2026
Calvin Arthur
Jun 08, 2026